Home > Diesel Trucks > Dodge/Ram > 1994-2002 Ram Cummins 5.9L > Engine
Sort By:
Page of 1
ARP Rod Bolt Kit - Dodge 5.9L 1989-2002 12V/24V ARP 12mm Main Stud Kit - Dodge 1998-2007 24v ARP 14mm Main Stud Kit - Dodge 1989-1998 12V
ARP Rod Bolt Kit - Dodge 5.9L 1989-2002 12V/24V
Our Price (with GST): $258.29 (271.20)
ARP 12mm Main Stud Kit - Dodge 1998-2007 24v
Our Price (with GST): $398.48 (418.40)
ARP 14mm Main Stud Kit - Dodge 1989-1998 12V
Our Price (with GST): $444.15 (466.36)
These ARP Rod Bolt Kit for your 1989-2002 Dodge 5.9L 12v & 24v Cummins are rated at the strength of 200,000 psi and provide the clamping force necessary.
Note: These Bolts are only for angled Cap Rods.
These ARP 12mm Main studs for your Dodge Cummins 1998-2007 24v are rated at the strength of 200,000 psi and provide the clamping force necessary to avoid walking of the main caps and fretting.
Not sure if yours is a 97.5 block? Look on the passenger's side of the engine. If there are 2 turbo drain ports, you have a 97.5
Please note: These studs WILL work on a 03+ Dodge 5.9L Commonrail, but some machining will have to be done to the stock block stiffener for clearan
ce
These ARP 14mm Main studs for your Dodge Cummins 12v 5.9L 1989-1998 are rated at the strength of 200,000 psi and provide the clamping force necessary to avoid walking of the main caps and fretting.
ARP Head Stud Kit - 1989-1998 Cummins 5.9L ARP2000 Head Stud Kit - Black Oxide ARP Head Stud Kit - 1989-1998 Cummins 5.9L Custom Aged ARP 625+ Head Stud Kit
The ARP 425 head studs of your Dodge Cummins 5.9L 12V for 1989-1998 have a tensile strength of 220,000 psi and provide the clamping force needed to prevent cylinders from lifting because of higher combustion pressure. A must if you replace head gaskets. The ARP 625+ head studs of your Dodge Cummins 5.9L 12V for 1989-1998 have a tensile strength of 260,000 psi and provide the clamping force needed to prevent cylinders from lifting because of higher combustion pressure. A must if you replace head gaskets.